|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FX-427 Low Jitter Frequency Translator Features * Quartz-based PLL for Ultra-Low Jitter * Frequency Translation up to 850 MHz * Accepts 4 externally-muxed clock inputs * LVCMOS/LVDS/LVPECL Inputs Compatible * Differential LVPECL Outputs * Lock Detect * Output Disable * 20.3 x 13.7 x 5.1 mm surface mount package * Compliant to EC RoHS Directive Description The FX-427 is a precision quartz-based frequency translator used to translate 1 to 4 selected input clocks as low as 8 kHz to an integer multiple as high as 850 MHz. The FX-427's superior jitter performance is achieved through the filtering action of the on-board voltage-controlled SAW oscillator (VCSO) and integrated loop filter. Two low-jitter outputs are provided. Monitoring and control functionality are also standard features. Applications * Wireless Infrastructure * 802.16 BTS * 10 Gigabit FC * 10GbE LAN / WAN * OADM and IP Routers * Test Equipment Figure 1. Functional Block Diagram Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 1 of 8 Tel: 1-88-VECTRON-1 * Web: www.vectron.com Rev: 8Nov06 FX-427 Low Jitter Frequency Translator Table 1. Electrical Performance Parameter Frequency Input Frequency Capture Range Output Frequency - Primary Output Frequency - Secondary FIN APR FOUT1 FOUT2 VCC ICC FIN FIN FIN VOCM VOH VOL VP-P tR tF SYM n n n n n n n J J TOP VCC-1.5 VCC-1.085 VCC-1.830 0.008 40 500 125 3.13 3.3 140 CMOS LVDS LVPECL VCC-1.3 VCC-0.950 VCC-1.700 700 0.5 0.5 50 -64/-27 -95/-55 -123/-85 -143/-110 -146/-130 -146/-146 -146/-146 0.30 0.12 0 to 70 or -40 to +85 VCC-1.1 VCC-0.880 VCC-1.620 V V V mV-pp ns ns % dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS ps RMS C 200 850 850 3.46 180 MHz ppm MHz MHz V mA 1,2,3 1,2,3 1,2,3 1,2,3 2,3 3 Symbol Minimum Typical Maximum Units Notes Supply Voltage Current (No Load) Input Signal CMOS LVDS LVPECL 2,3 Differential Output (Options F and P) Common Mode Output Voltage DC Output High Voltage DC Output Low Voltage Peak-to-Peak Output Voltage Rise Time Fall Time Symmetry SSB Phase Noise, FOUT = 155.52/622.08 @ 10 Hz Offset @ 100 Hz Offset @ 1 kHz Offset @ 10 kHz Offset @ 100 kHz Offset @ 1 MHz Offset @ 10 MHz Offset Jitter Generation 155.52 MHz (12 kHz - 20 MHz BW) 622.08 MHz (12 kHz - 20 MHz BW) 45 55 3,5 3,5 3,5 3,5 4,5 4,5 2,3 5,6 5, 6 1,3 Operating Temperature (Options C or F) 1. 2. 3. 4. 5. 6. See Standard Frequencies and Ordering Information. Parameters are tested with production test circuit below (Fig 2). Parameters are tested at ambient temperature with test limits guard banded for specified operating temperature. Measured from 20% to 80% of a full output swing (Fig 3). Not tested in production, guaranteed by design, verified at qualification. The FX-427 phase noise and jitter performance can be optimized for specific applications. Please consult with Vectron's Application Engineers for more information. Figure 2. Test Circuit Figure 3. LVPECL Waveform Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 2 of 8 Tel: 1-88-VECTRON-1 * Web: www.vectron.com Rev: 8Nov06 FX-427 Low Jitter Frequency Translator Figure 4. Pin Configuration Table 2. Pin Out Pin # 1 2 3 4 5 Symbol SEL0 SEL1 GND I/O I I GND Level LVCMOS LVCOMS Supply Function Frequency Select - see table 3 Frequency Select - see table 3 Case and Electrical Ground Not present VCXO Control Voltage Monitor Under locked conditions VMON should be > 0.3V and <3.0V. The input frequency may be out of range if the voltage exceeds these levels. Output Disable Disabled = Logic "1" Enabled = Logic "0" or no connect Lock Detect Locked = Logic "1" Loss of Lock = Logic "0" Frequency Output - Primary Complimentary Frequency Output - Primary Divided-Down VCSO/VCXO Output, or Disabled Complimentary Divided-Down VCSO/VCXO Output, or Disabled Case and Electrical Ground Input Frequency - AC Coupled Power Supply Voltage (3.3 V 5%) VMON O Analog (0 - Vcc) LVCMOS 6 OD I 7 8 9 10 11 12 13 14 LD FOUT1 CFOUT1 FOUT2 CFOUT2 GND FIN VCC O O O O O GND I VCC LVCMOS LCPECL LVPECL LVPECL LVPECL Supply LVCMOS or LVPECL Supply Table 3. Control Logic (LVCMOS) SEL0 0 0 1 1 SEL1 0 1 0 1 CLOCK INPUT FIN1 FIN2 FIN3 FIN4 Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 3 of 8 Tel: 1-88-VECTRON-1 * Web: www.vectron.com Rev: 8Nov06 FX-427 Low Jitter Frequency Translator Outline Diagram mm [inches] 0.79 [0.031] 20.32 [0.800] 2.54 [0.100] 1 R0.51 [R0.020] 7 14 8 BOTTOM VIEW BOARD 1.73 [0.068] 14 1.73 [0.068] 2.54 [0.100] 8 13.72 [0.540] 12.70 [0.500] TOP VIEW COVER 1 20.07 [0.790] 7 5.10 [0.201] Figure 5. ugg Suggested Pad Layout 21.59 [0.848] 2.54 [0.100] 14 KEEP OUT AREA NO CIRCUITRY UNDER HERE 1 3.05 [0.120] 1.90 [0.075] Figure 6. 8 9.40 [0.369] 7 Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 4 of 8 Tel: 1-88-VECTRON-1 * Web: www.vectron.com Rev: 8Nov06 FX-427 Low Jitter Frequency Translator Table 4. Absolute Maximum Ratings Parameter Power Supply Storage Temperature Soldering Temp/Time Symbol VCC TS TLS Ratings 0 to 6 -55 to 125 260/40 Unit V C C/sec Stresses in excess of the absolute maximum ratings can permanently damage the device. Functional operation is not implied at these or any other conditions in excess of conditions represented in the operational sections of this data sheet. Exposure to absolute maximum ratings for extended periods may adversely affect device reliability. Reliability VI qualification includes aging at various extreme temperatures, shock and vibration, temperature cycling, and IR reflow simulation. The FX-427 family is undergoing the following qualification tests: Environmental Compliance Parameter Mechanical Shock Mechanical Vibration Solderability Gross and Fine Leak Resistance to Solvents Conditions MIL-STD-883, Method 2002 MIL-STD-883, Method 2007 MIL-STD-883, Method 2003 MIL-STD-883, Method 1014 MIL-STD-883, Method 2016 Handling Precautions Although ESD protection circuitry has been designed into the FX-427 proper precautions should be taken when handling and mounting. VI employs a human body model (HBM) and a charged-device model (CDM) for ESD susceptibility testing and design protection evaluation ESD Ratings Model Human Body Model Charged Device Model Minimum 500 V 500 V Conditions MIL-STD 883, Method 3015 JEDEC, JESD22-C101 Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 5 of 8 Tel: 1-88-VECTRON-1 * Web: www.vectron.com Rev: 8Nov06 FX-427 Low Jitter Frequency Translator Reflow Profile (IPC/JEDEC J-STD-020C) Parameter Symbol PreHeat Time Ramp Up Time Above 217 oC Time To Peak Temperature Time At 260 oC Ramp Down tS R UP tL t AMB-P tP R DN Value 60 sec Min, 180 sec Max 3 oC/sec Max 60 sec Min, 150 sec Max 480 sec Max 20 sec Min, 40 sec Max 6 oC/sec Max Temperature (DegC) The FX-427 is qualified to meet the JEDEC standard for Pb-Free assembly. The temperatures and time intervals listed are based on the Pb-Free small body requirements. The temperatures refer to the topside of the package, measured on the package body surface. The FX-427 should not be subjected to a wash process that will immerse it in solvents. NO .CLEAN is the recommended procedure. The FX-427 has been designed for pick and place reflow soldering. The FX-427 may be reflowed once and should not be reflowed in the inverted position. 260 tL R tP R DN tS t AMB-P 217 200 150 25 Time (sec) Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 6 of 8 Tel: 1-88-VECTRON-1 * Web: www.vectron.com Rev: 8Nov06 FX-427 Low Jitter Frequency Translator Tape and Reel Po ODo W2 F W D C N A P1 W1 B Tape Dimensions (mm) Dimension Tolerance FX-427 Reel Dimensions (mm) Do Typ 1.5 W Typ 32 F Typ 14.2 Po Typ 4 P1 Typ 20 A Typ 330 B Min 1.5 C Typ 13 D Min 20.2 N Min 100 W1 Typ 44.4 W2 Max 50.4 # Per Reel 200 Vectron plans to offer both tape-n-reel and matrix trays as packaging options for the FX-427. The standard shipping container for volume production is a matrix tray. The trays are 100% recyclable and offer the added feature that they can be continuously fed into a pick-n-place machine. Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 7 of 8 Tel: 1-88-VECTRON-1 * Web: www.vectron.com Rev: 8Nov06 FX-427 Low Jitter Frequency Translator Standard Frequencies (MHz)* 0.0080 0.0160 1.5440 2.0480 10.0000 12.3520 19.4400 20.0000 30.7200 A3 A4 B3 B4 C4 D1 D6 E2 H1 31.2500 38.8800 51.8400 61.4400 77.7600 125.0000 155.5200 156.2500 161.1328 H8 H5 J4 J5 K2 L4 M2 M3 M4 166.6286 167.3316 201.4160 300.0000 311.0400 491.5200 531.2500 569.1964 622.0800 M5 N2 N1 PT P1 PM P8 P9 P2 625.0000 637.5000 644.5313 657.4219 666.5143 669.3266 672.1627 690.5692 693.4830 P3 PG P4 PB P5 R3 R5 R4 R6 707.3527 716.5732 718.7500 719.7344 748.0709 750.0000 777.6000 779.5686 780.8810 TC T1 T5 T3 T6 T7 T4 T8 TD 781.2500 796.8750 805.6641 809.0635 T9 TB TA TE Note 1: Other frequencies available upon request. Note 2: Not all combinations are possible. Note 3: For multiple input frequencies, replace the Input Frequency Code with "SS" and denote the input frequencies following the part number. Ordering Information EXAMPLE: FX-427-DFF-A3P2C FX-427, 3.3V, LVPECL output, -40 to +85C, FIN1 = 8 kHz, FOUT1 = 622.08 MHz, FOUT2 = 155.52 MHz. EXAMPLE: FX-427-DFC-SSP2B, S = 2.048 MHz, 19.44 MHz, 77.76 MHz FX-427, 3.3V, LVPECL output, 0 to 70C, FIN1 = 2.048 MHz, FIN2 = 19.44 MHz, FIN3 = 77.76 MHz, FOUT1 = 622.08 MHz, FOUT2 = 311.04 MHz For Additional Information, Please Contact: USA: Vectron International * 267 Lowell Rd. Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * Fax: 1-888-FAX-VECTRON EUROPE: Landstrasse, D-74924, Neckarbischofsheim, Germany * Tel: 49 (0) 7268 8010 * Fax: 49 (0) 7268 801281 ASIA: 1F-2F, No 8 Workshop, No. 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, China 200131 Tel: 86 21 5048 0777 * Fax: 86 21 5048 1881 Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 8 of 8 Tel: 1-88-VECTRON-1 * Web: www.vectron.com Rev: 8Nov06 |
Price & Availability of FX-427 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |